You must have javascript enabled to use brushednickel.org !

Diyhd Brushed Nickel

Steel Bypass Double Sliding Barn Door Hardware

USD $220.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Home & Garden / Home Improvement / Building & Hardware / Doors & Door Hardware / Other Door Hardware

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
Hardware Only,Not Including Door Panel 5FT/5.5FT/6FT/6.6FT are 1pcs track 8FT/10FT are 2pcs short track with a connector
DIYHD Brushed Nickel Steel Bypass Double Sliding barn Door Hardware One Piece Easy Mount Bypass Bracket
Hardware Only,Not Including Door Panel Material:Steel Surface:Brushed Nickel
Full set hardware including: Roller*4pcs Stopper*pcs Track*2pcs + Track&Wall Spacer*1 set + Bypass bracket*1 set Iron Floor guide*2pcs Anti-pad*4pcs
Full detail Bypass system require high space(at least 10" ) from top of the door to the ceiling,pls check your openning space before order. The gap between two doors are 2" based on the door thickness40mm(1 3/5") ,we don't have better way to reduce this gap. Customers can use thickness 45mm(1 3/4") door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4") to cover the sight between two door's gap. Track had been pre-drilled 16" apart holes,can be used for 16" apart studs wall. The bypass system need drill 3 line holes on the wall.It's very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10";Height 1") ,pls let your door maker finish this job when you order the door.
How to install bypass bracket
How to install barn door hardware:
Step1:(Inner door)
Drill holes on the wall
H is door panel's height,H+43MM(1-7/10") is the place we need drill holes for track to tight screws.
Step2:
Adjust stop's location,then tight the track on the wall with spacers.
Step3:
Drill holes on the door panel (see photo manuel step 3) and fix the wheels.
Step4:
The round dics are anti-pad,they can reduce the gap betweem door and track in case wheels jump off,pls definitely use them(any place on the top of the door and under the track)
Step5:
Hang wheels on the track.
Step6:
Bypass bracket's waist-shaped hole is on same leve as inner track,so aim the waist hole at inner track's hole to find 2 upper holes location on the wall.
Drill holes on the wall,and tight screws.
Step7:Fix outter track on the bypass bracket with spacers.
Step8:Hang outter door on the track and tight anti-pad
Step9:
Install floor guide on the floor under the groove of the door panel
Gallary for reference

Returns Accepted for this item if it's within 30 Days

DIYHD Brushed Nickel Steel Bypass Double Sliding barn Door Hardware
See more
Price type
IN STOCK OUT STOCK