SKU: N/AThis site contains affiliate links for which we may be compensated
Home & Garden / Home Improvement / Building & Hardware / Doors & Door Hardware / Other Door Hardware
DIYHD 11FT Brushed Nickel Steel Double Sliding Barn Wood Door Hardware for 2 Door Only Hardware for sale,Door panel is NOT included Material:Steel Surface:Brushed Nickel 11FT track length is 134 inch,wooden board required for studs wall Full set hardware including Roller*4 Stop*4 67inch track*2+Track connector+Track&wall connector*8 Floor guide*2 Anti-pad*4 Wooden board required for studs wall,door handles are not included Anti-pad 2pcs anti-pad installed on the top of the door can reduce gap between door and track in case rollers fall off from track,please use them for safety reason. Tec detail Make sure the length from top of the door to the ceiling is longer than 5-7/8" for installation. Drill holes on the door panel: a.first center hole to the top of the door:1-9/16". b.center length between two holes:3-9/16". Door panel need cut a groove for floor guide: Groove width:3/8". Groove height:3/4". 2pcs rollers and floor guide will be a triangle to keep door panel straight and not swing during sliding 8ft double kit including: roller*4; stopper*4; 8ft track*1; track&wall connector*6; anti-pad*4; floor guide*2; 10ft/11ft double kit including: roller*4; stopper*4; 5ft/5.5ft track*2; track connector*1; track&wall connector*8; anti-pad*4; floor guide*2; 12FT/13FT Package's including: Roller*4; Stopper*4; 6FT/6.6FT Sliding track*2; Track connector*1; Track&wall connector*10; Anti-pad*4; Floor guide*2 Track had been pre-drilled 16" apart holes;13FT is 2pcs 6.6ft track with a track connector On Sep-17-18 at 19:13:05 PDT, seller added the following information:
Returns Accepted for this item if it's within 30 Days